Kippzonen LOGBOX SD Data Logger Bedienungsanleitung PDF herunterladen (Seite 51)

AIN 1 = Plus from CMPupw

AIN 2 = Plus from CMPdown

AIN 3 = Plus from CGRupw

AIN 4 = Plus from CGRdown

AIN 6 = common ground for all above instruments.

Vref = 10K thermistor

AIN 5 = 10K thermistor & 10K reference resistor

GND = 10K reference resistor.

The next illustration displays the software configuration:

Please do not forget to enter the Polynomials P2 - P5 inside the coefficient area.

And please be aware of the multiplexing principle inside the Logbox SD, it will take at least a full

second before each measurement is performed. Meaning there will be a 4second time shift

between the measurement taken of the first channel and the measurement taken on the fourth

channel. (Albedo measurements should be taken on the same time interval.)

1 2 ... 46 47 48 49 50 51 52

Keine Kommentare

Kippzonen LOGBOX SD Data Logger Bedienungsanleitung Seite 51