Kippzonen Brewer MkIII Bedienungsanleitung PDF herunterladen (Seite 57)

MKIII OPERATOR'S MANUAL

Tracker Drive Mechanism - See Figure 5.2

If the Steps per Revolution test returns an erratic result, or a variance that is more than about 20

steps, then the large aluminum drive wheel and the small stainless steel drive rod should be

inspected and cleaned with a dry tissue.

If no slippage is observed in the SR, then the cleaning should be done approximately every 3

months.

If Tracker slippage is not due to dirty drive gears, then drive gear tensions should be checked.

The friction drive arm is set with 9 kg of tension on the lower spring and 4 kg on the upper spring to

provide drive friction and gear mesh pressures respectively.

Figure 5.2. Tracker Drive Mechanism

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 135 136

Keine Kommentare

Kippzonen Brewer MkIII Bedienungsanleitung Seite 57